evertz EQT-1616-3G-C, User Manual

Page: 62 / 102

EQT-1616-3G-C-C
EQT 12G/3G/HD Router
Page 50
7.4.1. Output Video
Clean Switch:
This field is used to enable/disable the clean switching functionality of the device.
Clean Switch Audio: This field is used to select the clean switching audio functionality of the device,
whether it is ‘Follow Video’, for embedded audio channels to be routed along with its respective video, or
‘Break-Away’, to route 320 audio channels independently of the video route.

NOTE: ‘Clean Switch Audio’ must be set to ‘Break-Away’, in order to route the
embedded audio channels and MADI audio channels independently.
Base Rate: This field is used to set/display the base rate of the input signal connected to the device.
No Signal Action: This field is used to set/display the action in case there is no input signal.

NOTE: ‘No Signal Action’ must be set to ‘Take’, in order for the routes, done in
Route section (7.4.8), to take effect.
7.4.2. Gearbox Selection
(See details in 5.1.2)
Quad 1:
This parameter is used to enable/disable 1-4 input and output ports to quad-link.
Quad 2: This parameter is used to enable/disable 5-8 input and output ports to quad-link.
Quad 3:
This parameter is used to enable/disable 9-12 input and output ports to quad-link.
Quad 4: This parameter is used to enable/disable 13-16 input and output ports to quad-link

NOTE: At least one of Gearboxes must be disabled to pass through a single-link
12G-SDI signal.
7.4.3. Clean Switch Individual Channel
Clean Switch Channel
: This field is used to enable/disable the clean switching functionality in each
channel.
Auto Clean Switch Bypass: This field is used to enable/disable the audio bypass functionality in each
channel, in case the input source does
not
match the base rate.

NOTE: ‘Clean Switch’ must be enabled, in order to use all the above features.