evertz EMX Series, User Manual

Page: 12 / 28

EMX Series Multiframes
Page - 4
Revision 1.6
Figure 2-3: EMX6-FR Rear View
2.1. COOLING – EMX1-FR
The EMX1-FR frame is designed to ensure adequate cooling for up to 140 watts of processing power per
frame. PSU’s are cooled with their own internal fans. Adjacent equipment may be mounted immediately
to the top and bottom of the EMX1-FR. Module cooling is provided by fans mounted to the front of panel
of the frame.
2.1.1. Fan Exhaust
The power supply fans draw air in the front and exhaust out the back of the frame. The module fans draw
in air from the front and exhaust out the right hand side of the frame.
CAUTION: To ensure adequate cooling, care should be taken to ensure that the
fan inlets and exhaust openings are free of obstructions.
CAUTION: To ensure adequate cooling of modules, the front panel must always
be securely mounted to the frame.