evertz 8010TM, Instruction Manual

Page: 77 / 98

Model 8010TM SDI Time Code Master Manual
SERIAL PROTOCOL
Revision 1.5.1
Page 4-7
4.5. DATA FORMATS
4.5.1.
Time Format Block
10 Frm 1 Frm 10 Sec 1 Sec 10 Min 1 Min 10 Hr 1 Hr Flags
The Flags byte is a bitmapped byte of the time code flag bits as follows:
Bit Name Meaning When Set to 0 Meaning When set to 1
0 Drop Frame Flag Non Drop Frame Drop Frame
1 Colour Frame Flag Non Colour Frame Colour Frame
2 VITC Field Flag Field 1 Field 2
3 Binary Group Flag 0
See table below 4 Binary Group Flag 1
5 Binary Group Flag 2
6 LTC Flag LTC is not active LTC is active
7 VITC Flag VITC is not active VITC is active
The Binary group flag bits are defined as follows:
Time Address User Bits BGF 2 BGF1 BGF0
Unspecified Unspecified 0 0 0
Unspecified Eight bit ISO Character set 0 0 1
Unspecified Date/Time Zone (SMPTE 309M) 1 0 0
Unspecified Page/Line (SMPTE 262M) 1 0 1
Clock Time Unspecified 0 1 0
Reserved Reserved 0 1 1
Clock Time Date/Time Zone (SMPTE 309M) 1 1 0
Clock Time Page/Line (SMPTE 262M) 1 1 1
4.5.2. Data Format Block
UB grp 2 UB grp 1 UB grp 4 UB grp 3 UB grp 6 UB grp 5 UB grp 8 UB grp 7
4.5.3. Display Data Block
Digit 1 Digit2 Digit 3 ... Digit14 Digit 15 Digit 16 LED
The LED byte is a bitmapped byte as follows:
Bit 0 VITC GEN Bit 4 JAM
Bit 1 COL’R Bit 5 UB TRANSFER
Bit 2 BYPASS Bit 6 LTC RDR
Bit 3 VIDEO Bit 7 VITC RDR