background image

 

  

 
 
 
 
 

 
 
 
 
 

7882DEC-H264HD-IPASI  

HD/SD MPEG-2 and H.264 Decoder 

User Manual 

 

 
 

 

 

 
 

 
 
 
 
 
 
 
 
© Copyright 2014-2016 
 

EVERTZ MICROSYSTEMS LTD. 

5288 John Lucas Drive 
Burlington, Ontario 
Canada L7L 5Z9 
Phone: 

+1 905-335-3700 

Sales: 

[email protected] 

Fax:  +1 905-335-3573 

Tech Support:  [email protected]  

Fax:   +1 905-335-7571 

Web Page: 

http://www.evertz.com

 

 
Version 1.0, October 2016 
 
The material contained in this manual consists of information that is the property of Evertz Microsystems and is 
intended solely for the use of purchasers of the 7882DEC  series products.  Evertz Microsystems expressly 
prohibits the use of this manual for any purpose other than the operation of the 7882DEC series products.  Due to 
on going research and development, features and specifications in this manual are subject to change without 
notice. 
 
All rights reserved.  No part of this publication may be reproduced without the express written permission of 
Evertz Microsystems Ltd.  Copies of this manual can be ordered from your Evertz dealer or from Evertz 
Microsystems.

 

Summary of Contents for 7882DEC-H264HD-IPASI



































































Reviews: