evertz 7881TSM-IP, User Manual

Page: 46 / 64

7881TSM-IP
User Manual
Page - 36
Version 1.0
DPI MONITOR
Figure 7-4 - VistaLINK PRO DPI Monitor Tab
7.4.1. DPI MONITORING
DPI Monitor Enabling:
This parameter allows the user to enable/disable all DPI monitoring. It is a global
enable/disable for all DPI traps.
DPI Inactivity Timeout: This parameter sets the duration of the DPI inactivity timeout in minutes. If the period
set on the slider is exceeded between DPI pid arrivals a DPI timeout trap is triggered.
7.4.2. DPI TRAP ENABLE
DPI Timeout:
This control enables/disables the DPI Timeout SNMP trap
.
DPI Message: This control enables/disables the DPI Message SNMP trap
.
DPI Syntax: This control enables/disables the DPI Syntax SNMP trap.
7.4.3. DPI TRAP STATUS
DPI Timeout:
Indicates whether the specified timer runs out before the program receives a new DPI message
since the last DPI message was received. If the DPI Inactivity Timeout setting is met before the next DPI packet
arrives a trap will be sent. This is only the status this parameter wouldn’t send any trap.
DPI Message: Indicates whether the stream has received a DPI PID. This parameter will send a trap every time
a DPI message is received on the input. This is only the status this parameter wouldn’t send any trap.
DPI Syntax: Indicates whether the received DPI message has a syntax error. A trap will be sent if there is any
issue with the structure of a DPI packet in the stream. This is only the status; this parameter wouldn’t send any
trap.