evertz 7814UDX-4K Series User Manual Download

Page: 12 / 64

7814UDX-4K Series

HD/3G/UHD Up/Down/Cross Converters

Page - 2

Revision 1.2

HD to

(SF)

HD to

(DF)

HD to

3G to

(SF)

3G to

(DF)

3G to

4K to

(SF)

4K to

(DF)

7814UDX-4K

●

7814HDC-4K

●

7814UC-4K

●

7814XC-4K

●

Normal Operation

Outputs Black

Same format (1080i to 1080i)

Difference format (720p to 1080i or 1080i to 720p)

Table

1-1 : Differences Between 7814UDX-4K Series Converters (Ordering Options)

This manual will serve to cover the 7814UDX-4K, the 7814UC-4K, the 7814-XC and the 7814HDC-4K
base products as well as the –AES8 versions.

Features & Benefits

•

Broadcast quality up/downconversion between common HD/SMPTE 292M and 3G/SMPTE 424M

video signals to/from UHD.

•

Integrated frame synchronizers (quad input frame synchronizers on 7814UDX-4K and 7814HDC-

4K to time quad-lane SDI inputs)

•

Support for card reference connection and two sources of 7800FR frame reference (software

selectable from the three sources)

•

Advanced 3D noise reduction and next generation de-interlacing technologies ensure the highest

quality video without compromise for broadcast and professional media applications

•

Broadcast quality color corrector and detail enhancement engines optional (+VPROC option)

•

16 channel embedded audio support

•

Audio delay automatically tracks video delay

•

Full audio proc and channel swapping plus 5.1 surround sound to stereo (Lt/Rt and Lo/Ro) down-

mixing provided with +APROC option

•

Supports 8 external AES inputs and 8 AES outputs (-AES8 versions only)

•

SNMP capable for remote monitoring, control and configuration capabilities using WebEASY

VistaLINK® PRO, CP-2116E or CP-2232E Control panels

•

VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC

VistaLINK® Frame Controller module in slot 1 of the frame

Summary of Contents for 7814UDX-4K Series

































































Search results

Summary of Contents for 7814UDX-4K Series

Reviews:

Related manuals for 7814UDX-4K Series

Brands by name

Popular brands

evertz 7814UDX-4K Series, User Manual

Search results

Summary of Contents for 7814UDX-4K Series

Reviews:

Related manuals for 7814UDX-4K Series

Brands by name

Popular brands