7780M4-ASI / 7780D4-ASI
Quad ASI TDM-Mux/Demux
Revision 1.0
Page 19
7.5. FAULTS
The
Faults
tab allows custom configuration of the traps and displays the trap status. Use the auto-
refresh option in VLPro to see the status dynamically updating. In order to enable a trap simply click on
the check box associated with the trap you wish to enable.
Figure 7-4: Faults Tab – 7780D4-ASI
•
SDI Input:
This status indicator will remain green as long as a valid SDI input is detected.
•
ASI Output 1/2/3/4:
This status indicator will remain red unless a valid ASI Output is present.
•
ASI Input Bandwidth 1/2/3/4:
This trap status will change to red if the ASI input bandwidth
exceeds the limit set by the user.
•
Input 1/2/3/4 Continuity Count Error:
This trap status will change to red every time the
continuity count counter is incremented indicating a missing or lost packet.
