manualshive.com logo in svg

evertz 7780ASIB2-DS3/E3, Manual

Share
Download
evertz 7780ASIB2-DS3/E3 Manual Download Page 31

7700 MultiFrame Manual 

7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver 

 Revision 

2.0 

Page - 27 

7. 

VISTALINK

®

 

REMOTE MONITORING/CONTROL 

7.1. WHAT 

IS 

V

ISTA

LINK

®

? 

Vista

LINK

®

 

is Evertz’s remote monitoring and configuration platform which operates over an Ethernet 

network using Simple Network Management Protocol (SNMP).  SNMP is a standard computer network 
protocol that enables different devices sharing the same network to communicate with each other.  

Vista

LINK

®

 provides centralized alarm management, which monitors, reports, and logs all incoming alarm 

events and dispatches alerts to all the VLPro Clients connected to the server.  Card configuration through 

Vista

LINK

®

 PRO can be performed on an individual or multi-card basis using simple copy and paste 

routines, which reduces the time to configure each module separately.  Finally, 

Vista

LINK

®

 enables the 

user to configure devices in the network from a central station and receive feedback that the configuration 
has been carried out. 
 
There are 3 components of SNMP: 
 
1.  An SNMP manager, also known as a Network Management System (NMS), is a computer running 

special software that communicates with the devices in the network.  Evertz VL-Fiber demo Manager 
graphical user interface (GUI), third party or custom manager software may be used to monitor and 
control Evertz 

Vista

LINK

®

 enabled fiber optic products. 

 
2. Managed devices (such as 7780ASIB2-DS3/E3 cards), each with a unique address (OID), 

communicate with the NMS through an SNMP Agent.  Evertz 

Vista

LINK

®

 enabled 7700 series modules 

reside in the 3RU 7700FR-C MultiFrame and communicate with the manager via the 7700FC 

Vista

LINK

®

 frame controller module, which serves as the Agent. 

 
3.  The 7780ASIB2-DS3/E3 card also includes an onboard mini agent that can be accessed through the 

CONTROL port on the rear plate of the card.  Connecting this CONTROL port to the management 
network will allow the unit to communicate without a 7700FC frame controller. 

 
4.  A virtual database, known as the Management information Base (MIB), lists all the variables being 

monitored, which both the Manager and Agent understand.  Please contact Evertz for further 
information about obtaining a copy of the MIB for interfacing to a third party Manager/NMS. 

 
For more information on connecting and configuring the 

Vista

LINK

®

 network, see the 7700FC Frame 

Controller chapter. 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 7780ASIB2-DS3/E3





































Reviews:

No comments

Brands by name

Popular brands

Load more brands