7700 MultiFrame Manual
7707VT-8-HS 8 Channel HD/SDI/DVI-ASI Fiber Transmitter
Revision
1.2
Page - 3
"
NOTE: Only a single port of the XFP module is in use. This port corresponds to
the location of the “Fiber Output” label.
CONTROL:
RJ-45 Ethernet connection for SNMP monitoring and control. Module possesses local SNMP
agent.
2.1.
CARE AND HANDLING OF OPTICAL FIBER
2.1.1. Safety
CLASS 1 LASER PRODUCT
2.1.2. Assembly
Assembly or repair of the laser sub-module is done only at Evertz facility and performed only by qualified
Evertz technical personnel.
2.1.3. Labeling
Certification and Identification labels are combined into one label. As there is not enough room on the
product to place the label, it is reproduced here in the manuals.
•
There is no date of manufacture on this label as it can be traced by the bar code label placed on
the printed circuit board of each Evertz plug-in module.
Figure 2-2: Reproduction of Laser Certification and Identification Label
