7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Page - 20
Revision
1.0
CTRL
FIBR
CIC
15m
24h
ALL
CLR
BACK
The following selections are available:
15m
CLR
to clear the 15-minute counter
24h
CLR
to clear the 24-hour counter
ALL
CLR
to clear both counters
To clear the
Loss of Link Counter
from the
CTRL
menu, use the toggle switch/pushbutton to select the
FIBR
menu and then choose the
LOSL
menu item.
CTRL
FIBR
LOSL
CLR
BACK
The following selections are available:
LOSL
CLR
to clear Loss of Link Counter
To clear the
Error Ratios
(ESR SECT, LINE and PATH) from the
CTRL
menu, use the toggle
switch/pushbutton to select the
FIBR
menu and then choose the
CESR
menu item.
CTRL
FIBR
CESR
CLR
BACK
The following selections are available:
CESR
CLR
to clear all Error Ratios
4.2.2.5.
Setting the Severe Errored Second Threshold
The
Severe Errored Second
(SES) threshold can be controlled using menu selections. To configure the
SES Threshold
from the
CTRL
menu, use the toggle switch/pushbutton to select the
FIBR
menu item and
then choose the
SETH
menu item.
CTRL
FIBR
SETH
SESS
SESL
SESP
SEFS
1 to 9999
The following selections are available:
SESS
Severe Errored Seconds – Section
SESL
Severe Errored Seconds – Line
SESP
Severe Errored Seconds – Path
SEFS
Severe Errored Seconds - Frame
4.2.2.6.
Passcode Protection Configuration
The channels’ passcode protection can be controlled using menu selections. To configure the channel
passcode protection from the
CTRL
menu, use the toggle switch/pushbutton to select the
PSWD
menu item.
Use the toggle switch to increase or decrease the digits one at a time and use the pushbutton to select
each digit until the correct passcode is entered (Default
7154
).
