7700 MultiFrame Manual
7707VB-8-ASI-OC3 8 Channel ASI + Ethernet SONET / SDH Fiber Transceiver
Page - 16
Revision
1.0
4.2.1.11.
Displaying Output ASI Status Information
This menu selection displays various information contained in the output DVB-ASI stream. Parameters
such as
Total TS Bit Rate
,
Null Packet Bit Rate
,
Useful Bit Rate
, Number of Active PID’s, and
Number of
Continuity Count Errors
can be displayed. To display the
ASI Status Information
from the
STAT
menu, use
the toggle switch/pushbutton to select the
OASI
menu and then choose one of
RATE, NULL, DATA,
PID
,
or
CCER
under
ASI(1-8).
STAT
OASI
ASI1 – ASI8
RATE, NULL,
DATA, PID, CCER
0-107 for rates
0-128 for PID’s
0-9999 for error
counter
The following indications are possible:
RATE
Total TS Bit Rate
NULL
Null Packet Bit Rate
DATA
Useful Bit Rate
PID
Number of Active PID’s
CCER
Number of Continuity Count Errors
4.2.1.12.
Displaying the Output ASI Bandwidth Used
This menu selection displays the sum of the 8 output channel bandwidths. To display the T
otal Output
Bandwidth Used
from the
STAT
menu, use the toggle switch/pushbutton to select the
OASI
menu and then
choose
OPBW
, followed by
USED
.
STAT
OASI
OPBW
USED
The following indications are possible:
USED
Combined Output Bandwidth
4.2.1.13.
Displaying the TDMD Data Errors
This menu selection displays the errors in the clear channel TDM data. This allows the user to monitor if
transmission errors are occurring at the SONET network or at the TDM stream. To display the
TDMD
Data Error
from the
STAT
menu, use the toggle switch/pushbutton to select the
TDMD
menu.
STAT
TDMD
LOSS
ERR
OK
The following indications are possible:
LOSS
TDM Data Lost
ERR
TDM Error Detected
OK
TDM Data is present and no errors are detected
