7700 MultiFrame Manual
7705OE-3 Triple SDI Optical to Electrical Converter, 19.4Mb/s or 143-540Mb/s
Revision
1.2
7705OE-3 - 3
2. INSTALLATION
The 7705OE-3 comes with a companion rear plate that has three BNC connectors and three SC/PC
(shown), ST/PC or FC/PC optical connectors. For information on mounting the rear plate and inserting the
module into the frame see section 3 of the 7700FR chapter.
Figure 2-1: 7705OE-3 Rear Panel
SDI INPUT:
There are three SC/PC (shown), ST/PC or FC/PC female optical connectors for 3
separate channels of SMPTE 297M optical 10-bit serial digital video signals
compatible with the SMPTE
259M, SMPTE 305M SMPTE
344M, DVB-ASI or
SMPTE 310M (19.4 Mb/s) standards.
SDI OUTPUT:
There are three BNC connectors each with a reclocked serial component video output
converted from the corresponding channel. The output signals are compatible with the
SMPTE 259M, SMPTE 305M SMPTE 344M, DVB-ASI or SMPTE 310M (19.4 Mb/s)
standards. See section 5.2 for information about operating the module with SMPTE
310M signals.
