evertz 570ASI-X19-10GE2, User Manual

Page: 33 / 40

570ASI–X19-10GE2 Series
User Manual
Page - 23
4.6.3. Uncompressed IP Output Control
For IP Outputs 1 to 6
IP Output Enable: This parameter is used to enable or disable an output.
Source IP Address: This parameter allows the user to define source IP address.
Source UDP Port: This parameter allows the user to define source UDP port.
Destination IP Address: This parameter allows the user to define destination IP address.
Destination UDP Port: This parameter allows the user to define destination UDP port.
Time to Live: This parameter allows the user to define time to live limit (in # of hops) for IP output.
DSCP: This parameter allows the user to define a differentiated services code point. Choices are:
●
Default
●
AF12
●
AF22
●
AF32
●
AF42
●
CS2
●
CS5
●
EF
●
AF13
●
AF23
●
AF33
●
AF43
●
CS3
●
CS6
●
AF11
●
AF21
●
AF31
●
AF41
●
CS1
●
CS4
●
CS7
RTP Mode: This parameter allows the user to enable or disable Redundant Packet Transmission.
4.6.4. Audio Groups 1-4
For IP Outputs 1 to 6
IP Output Enable: This parameter allows the user to enable the SMPTE 2110 audio.
Destination IP Address: This parameter allows the user to set output IP address/multicast address.
Destination UDP Port Number: This parameter allows the user to set the output UDP port number.
4.6.5. ANC
For IP Outputs 1 to 6
IP Output Enable: This parameter allows the user to enable the SMPTE 2110 audio.
Destination IP Address: This parameter allows the user to set output IP address/multicast address.
Destination UDP Port Number: This parameter allows the user to set the output UDP port number.
4.6.6. SMPTE 2110 RTP Payload Type
RTP Payload Type:
This field allows the user to set the RTP payload type.
Audio RTP Payload Type: This parameter allows the user to set the Payload Type for audio RTP
header.
ANC RTP Payload Type: This parameter allows the user to set the Payload Type for ANC RTP
header.