evertz 570ASI-X19-10GE2, User Manual

Page: 30 / 40

570ASI–X19-10GE2 Series
User Manual
Page - 20
Fail Over Mode Selection: This dropdown allows the user to select the failover mode for the received
master PCR stream.
• Automatic
• Main
• Backup
Fail Over Status: This parameter displays the current status of the master PCR fail over.
PTP or Master PCR Presence:
This parameter indicates whether a valid Master PCR is present or a
valid PTP stream is present.
Locked:
This parameter indicates whether the card is locked to Master PCR or PTP.
4.5.2. PTP Control
For SFPP 1 to 6
Domain Number:
This control allows the user to set the domain number.
4.5.3. Master PCR Control
IP Address:
This field allows the user to set the IP address from which to obtain the Master PCR time
reference.
UDP Port Number: This field allows the user to set the UDP port number from which to obtain the
Master PCR time reference.
PCR PID: This parameter allows the user to set the expected PCR PID.
PCR Presence: This field indicates whether PCR presence is detected on this data port or not.
IGMPv3 Mode: This field allows the user to select the Master PCR IGMP V3 mode.
IGMPv3 SSM Src 1-6: This parameter allows the user to set Master PCR IP addresses which are used
when forming the source filter for IGMPv3 communications.