evertz 570ASI-X19-10GE2, User Manual

Page: 28 / 40

570ASI–X19-10GE2 Series
User Manual
Page - 18
4.4. DIN INPUT CONTROL
Figure 4-10: WebEASY
®
- DIN Input Control
4.4.1. Input Monitoring
For DIN Inputs 1 to 6
Input Detected:
The 570ASI-X19 card can accept both SDI and ASI sources. The 570ASI-X19 will
automatically detect the DIN Input type provided. The Input detected field reflects the detected type of
DIN input stream.
Input Video Standard: This display shows the video standard of the SDI input. (not applicable for ASI
input).
SDI Loss Count: This field displays the SDI input video loss counter.
ASI Packet Size: This field displays the transport stream packet size in bytes.
Received Total TS Bitrate: This field displays the total bitrate for the multicast stream specified.
Received NULL Packet Bitrate: This field displays the total NULL packet bitrate for multicast stream
specified.
Number of PID in TS: This field displays the total number of Packet IDs in the transport stream.
Loss Sync Count: This field displays the total count of sync loss.
CC Error Count: This field displays the total count of Closed Captioning error.
VPID Correction: This control allows the user to enable or disable VPID correction for incoming SDI
signal.
Clear Status: This button allows the user to reset the values for the selected DIN Input.