1200DD Series Digital Data Display Manual
Revision 1.8
1200DD - 3-15
3.4.11. Setting the Date
SD
With this menu item, you can set the date in the internal clock of the
1200DD. Dates are always entered in the YYMMDD format regardless of the
setting of the
DD
menu item setting.
Use the following procedure to set the date. You can press the
SETUP
key
at any time to exit the
Set Time
mode without affecting the clock time.
Press the
SELECT
key to begin date entry - all digits blink. Press the
ITEM
key to advance the year digits – the year digits stop blinking.
Press the
SELECT
key to adjust the month – the year digits start blinking,
month digits stop blinking. Press the
ITEM
key to advance the month digits.
Press the
SELECT
key to adjust the day – the month digits start blinking, the
day digits stop blinking. Press the
ITEM
key to advance the day digits.
Press the
SELECT
key to complete the date entry. All the digits will blink as
this is now the current date.
Press the
SETUP
key to exit the
Setup
menu and return to the normal
display.
00 00 00
3.4.12. Setting the Internet Protocol and NTP Rules
The
IC
menu item, allows you to configure the Internet Protocol and NTP rules. When in
IC
menu, the
two leftmost numeric displays show “IC”, and the alphanumeric display flashes the sub menu choice to
indicate that there is another level of menus. Use the
ITEM
key to move through the list of available IC
sub menu items. Once you have chosen the desired sub menu item, press the
SELECT
key to enter the
bottom menu level. Pressing select enters the selected menu item.