Settings Menu 6
107678
|
V1.5-10/2019
53/ 106
6.4
Products & Keys
With manager access it is possible to modify the following settings.
(1)
Key Name
, press to type in a new name (maximum 13 characters).
(2)
Water Quantity
, press to modify the number of ticks or seconds (adjust with the slider or up/down
keys).
(3)
Milk Quantity
(only for milk products), press to modify the numbers of seconds.
(4)
Learn water
A.
Press
Learn Water
to dispense a coffee.
B.
When the desired level is in the cup, press the same button to stop the drink.
This memorizes the number of ticks.
(5)
Product test
Ensure that at least 6 beverages are run using
Product Test
to achieve the desired coffee and extraction
time and that the grinder is delivering the correct amount of coffee for the set cake thickness.
To adjust see
“6.6 Beans & Grinder” on page 56.
Everfoam and auto foam products
With these steam products it is possible to control the
Stop Temperature
.
Hot water products
With hot water products it is possible to control the
Water Temperature.
The hot water quantity is set in seconds when dispensed from the steam boiler and in ticks (controlled
by the flowmeter) when it is dispensed from the coffee boiler.
Adjustment range is 0 to 1000 ticks. Ticks are approximately equal to ml.
The milk quantity is set in seconds. Adjustment range is 0 to 100 seconds.
Fig. 6-7
page 1/2
page 2/2
1
3
4
5
2
