7700 MultiFrame Manual
7707VR-4 Quad SDI Fiber Receiver
Page-2
Revision
1.3
2. INSTALLATION
The 7707VR-4 comes with a companion rear plate that has four BNC connectors and one SC/PC (shown),
ST/PC or FC/PC optical connector. For information on mounting the rear plate and inserting the module
into the frame see section 3 of the 7700FR chapter.
Figure 2-1: 7707VR-4 Rear Panel
OPTICAL INPUT:
SC/PC, SC/PC with cover (shown), ST/PC or FC/PC female connector. This wide
range input accepts optical wavelengths of 1270nm to 1610nm, accommodating
standard or CWDM transmission schemes.
"
Do not hook up the 7707VT-4 DWDM cards and 7707VR-4 cards directly with a short
fiber optic cable. The 7707VT-4 DWDM card pr7dBm of power which will
damage the receiver if connected directly.
