7700 MultiFrame Manual
7707VR-4 Quad SDI Fiber Receiver
Revision
1.3
Page-13
6. VISTALINK
®
REMOTE MONITORING/CONTROL
6.1.
WHAT IS V
ISTA
LINK
®
?
VistaLINK
®
is Evertz’s remote monitoring and configuration platform which operates over an Ethernet
network using Simple Network Management Protocol (SNMP). SNMP is a standard computer network
protocol that enables different devices sharing the same network to communicate with each other.
VistaLINK
®
provides centralized alarm management, which monitors, reports, and logs all incoming alarm
events and dispatches alerts to all the VLPro Clients connected to the server. Card configuration through
VistaLINK
®
PRO can be performed on an individual or multi-card basis using simple copy and paste
routines, which reduces the time to configure each module separately. Finally, VistaLINK
®
enables the
user to configure devices in the network from a central station and receive feedback that the configuration
has been carried out.
There are 3 components of SNMP:
1. An SNMP manager, also known as a Network Management System (NMS), is a computer running
special software that communicates with the devices in the network. Evertz VL-Fiber demo Manager
graphical user interface (GUI), third party or custom manager software may be used to monitor and
control Evertz VistaLINK
®
enabled fiber optic products.
2. Managed devices (such as 7707VR-4) each with a unique address (OID) communicate with the NMS
through an SNMP Agent. Evertz VistaLINK
®
enabled 7700 series modules reside in the 3RU 7700FR-
C MultiFrame and communicate with the manager via the 7700FC VistaLINK
®
frame controller module,
which serves as the Agent.
3. A virtual database, known as the Management information Base (MIB), lists all the variables being
monitored, which both the Manager and Agent understand. Please contact Evertz for further
information about obtaining a copy of the MIB for interfacing to a third party Manager/NMS.
For more information on connecting and configuring the VistaLINK
®
network, see the 7700FC Frame
Controller chapter.
6.2. V
ISTA
LINK
®
MONITORED PARAMETERS
The following parameters can be remotely monitored through the VistaLINK
®
interface.
Parameter Description
Video 1,2,3,4 Standard
A range of values describing the detected video standard.
Optical Power
A range of values describing optical power at the fiber input.
Local Remote Jumper
Indicates whether the card is in Local or Remote mode. (The
position of master jumper)
Table 6-1: VistaLINK
®
Monitored Parameters
