7700 MultiFrame Manual
7707VR-4 Quad SDI Fiber Receiver
Page-10
Revision
1.3
4.2.4. Signal BLOCK Configuration
Depress the Button and select the PSWD option. Actuate the toggle switch to achieve the correct code
number (Factory Default = 0).
PSWD
0-9999
VCH1 – VCH4
EN
DIS
PWSD
Store a new passcode (0-9999) required for BLOCK
configuration. This menu is not available without entering the
correct passcode.
VCH1
Enable / Disable. When Disabled the data received on the fiber
link intended for output 1 is not output. This menu item is not
modifiable without entering the correct passcode, though its
current state is viewable.
Similar functionality for menu selections
VCH2
through
VCH4
.
4.2.5. Setting the Orientation of the Text on the Card Edge Display
On the 7707VR-4 the
DISP
display allows you to set a horizontal or vertical orientation for the card edge
display messages. After one second the display will show a message indicating the current orientation of
the display. When this message is displayed, press the pushbutton to change the orientation of the
display.
DISP
HOR
VERT
HOR
Horizontal display used when the module is housed in the 1 rack
unit 7701FR frame or the stand-alone enclosure.
VERT
Vertical display used when the module is housed in the 3-rack unit
7700FR frame.
