7700 MultiFrame Manual
7707VR-4 Quad SDI Fiber Receiver
Revision
1.3
Page-7
4.2. DOT-MATRIX
DISPLAY
Additional signal and status monitoring is provided via the 4-digit dot-matrix display located on the card
edge. The card-edge pushbutton is used to select which data is being displayed in the alphanumeric
display. Each time the pushbutton is pressed, the display advances to the next available display. A
message indicating what display mode is active is shown for one second. After one second without the
pushbutton being pressed, the selected display data is shown.
DISC / CONT
DISC / CONT
OUT1
OUT4
VOUT
(Video Output on
Loss)
OVER
0 to -40 dBm
-7 to -40
< MIN
VSD1
(Video Standard)
0 - 9999
VCH1
VCH4
DIS / EN
DIS / EN
PSWD
(Passcode)
Output Video 2 Standard
(see list in 4.2.2 section)
VSD2
(Video Standard)
Output Video 4 Standard
(see list in 4.2.2 section)
VSD4
(Video Standard)
PWR
(OpticalPower)
Menu Level 1
VERT
HOR
VER
(Software Version)
DISP
(Display Orientation)
Version number and build
shifted right to left
Top Menu Level
LINK ERR
(If No Link with VT-4)
OK
(If Linked with VT-4)
Output Video 3 Standard
(see list in 4.2.2 section)
VSD3
(Video Standard)
Menu Level 3
UPGRD
(Upgrade Mode)
YES
NO
Output Video 1 Standard
(see list in 4.2.2 section)
Menu Level 2
Pushbutton
Toggle
Switch
Figure 4-2: Display Menu Structure
