Bloom Laundry Unit Installation Guide
Step 1- Preparing the assembly
While facing the assembled Drawer Cabinet, determine where the washing machine will be positioned. On that
side, insert the Timber Dowels into the suitable holes located along the top and back edge of the side of the
Drawer Cabinet (4 Dowels in total). Insert the Cam Lock Screws into the threaded holes next to the location of the
Dowels. Screw in the Cam Lock Screws in by hand, do not over tighten.
Repeat this process on the Return End.
Insert Cam Locks into the holes on both the Top Brace and Back Brace of the cabinet.
Contents
Polymarble Top
x 1
Bloom Back Brace x 1
Bloom Top Brace x 1
Bloom Assembled Drawer Cabinet x 1
Timber Dowels
x 8
Cam lock Screws x 8
Cam Locks
x 8
Blanking Stickers x 14
Bloom Return End
x 1
Plastic Caps
x 2
Plastic Grommets x 2
90mm Basket
Waste
x 1
Tools Required – Phillips Head Screwdriver
For best results, we recommend that two people assemble this product.
Page 1 of 2
Blo
om L
aundr
y Unit I
nstalla
tion G
uide
Blo
om L
aundr
y Unit I
nstalla
tion G
uide
