H.265 VANGUARD 4x2H / 8x4H / 16x8H
173
5.4.2.3 Capture
On this page, you can configure the snapshot parameters or set up the snapshot schedule.
On this page, you can configure the snapshot parameters.
Channel:
Select a channel from the drop-down list.
Stream Mode:
Select main stream or sub stream for the snapshot image.
Normal Interval:
Configure an interval to automatically take a normal snapshot.
Alarm Interval:
Configure an interval to automatically take a snapshot when motion, IO
alarm or PIR is triggered.
Auto Capture:
Switch the button to the right to enable the Auto Snapshot function for
normal recording, motion, PIR events.
Click
Save
to save the settings or
Refresh
to refresh the page.
Click the
Copy
button to display the channel options. Select the channels and then click the
Copy
button to copy the same configurations from this channel to the selected channels.
5.4.2.3.1 Capture
