background image

M 1 2 2 - E J 2 3 0 - 0 0 2

HIGH PERFORMANCE 

BULLET CAMERA

O P E R AT I O N   M A N U A L

Thank  you  for  choosing  our  high  quality  camera.  Before 

attempting  to  connect  or  operate,  please  read  and  follow 

these instructions.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European 
countries with separate collection systems)

This marking shown on the product or its literature, indicate that 

it should not be disposed with other household wastes at the end 

of its working life. To prevent possible harm to the environment or 

human health from uncontrolled waste disposal, please separate 

this from other types of wastes and recycle it responsibly to promote 

the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes 

purchased this product, or their local government office, for details 

of where and how they can take item for environmentally safe 

recycling.

Business users should contact their supplier and check the terms 

and conditions of the purchase contract.

Household users should contact either the retailer where they for 

disposal.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 

                   NOT REMOVE COVER(OR BACK). NO USER. SERVICING

                   TO QUALIFED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence 

of uninsulated "dangerous voltage" within the product's 

enclosure that may be of sufficient mangnitude to constitute 

a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of 

important operating and maintenance(servicing) instruction in 

the literature accompanying the appliance.

M O U N T I N G   P O S I T I O N

C A U T I O N S

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received,

     including interference that may cause undesired operation.

Note -

This equipment has been tested and found to comply with the limits for a 

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference when 

the equipment is operated in a commercial environment. This equipment 

generates, uses, and can radiate radio frequency energy and, if not installed 

and used in accordance with the instruction manual, may cause harmful 

interference to radio communications. Operation of this equipment in a 

residential area is likely to cause harmful interference in which case the user 

will be required to correct the interference at his own expense.” 

WARNING -

This is a class A product. In a domestic environment this product may cause 

radio interference in which case the user may be required to take adequate 

measures.

Caution -

Any changes or modifications in construction of this devies which are not 

expressly approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.

 

CAUTION

 

1. A regulated DC12V 300mA power supply is recommended for use with 

this camera for the best picture and the most stable operation. 

An unregulated power supply can cause damage to the camera. When 
unregulated power supply is applied, 
product warranty will be out of subject.

2. It is recommended that the camera is used with a monitor that has a 

CCTV quality 75 video impedance level. If your monitor is switched to high 

impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal 

componets. Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reflective light, 

which may cause smear on the picture and possible damage to the CCD.

5. Do not remove the serial sticker for the warranty service.

C O M P O N E N T S

Bullet

Camera

Mounting 

Bracket

Screw 3ea

Operation 

Manual

(A'ssy View)

These servicing instructions are for use by qualified service personnel only. 

To reduce the risk of electric shock do not perform any servicing other than 

that contained in the operating instructions unless you are qualified to do so.

Use Class 2 Power Supply Only.

I M P O R T A N T   S A F E T Y   I N S T R U C T I O N

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance 

    with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat 

    registers,stoves, or other apparatus (including amplifiers) 

    that produce heat.

9) Do not defeat the safety purpose of the polarized or 

    grounding- type plug. A polarized plug has two blades with one 

    wider than the other. A grounding type plug has two blades and 

    a third grounding prong. The wide blade or the third prong are 

    provided for your safety. If the provided plug does not fit into your 

    outlet, consult an electrician for replacement of the obsolete 

    outlet.

10) Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 

where they exit from the apparatus.

11) Only use attachments/accessories specified by the 

      manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified 

      by the manufacturer, or sold with the apparatus. 

      When a cart is used, use caution when moving 

      the cart/apparatus combination to avoid injury 

      from tip-over.

13) Unplug this apparatus during lightning storms or when unused 

      for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, 

such as power-supply cord or plug is damaged, liquid has been 

spilled or objects have fallen into the apparatus, the apparatus 

has been exposed to rain or moisture, does not operate 

normally, or has been dropped.

C O N N E C T I O N

DC12V

(BLACK)

BNC FEMALE

DC12V POWER SUPPLY

VIDEO IN

TV MONITOR

When you install the camera, please glue up the end of 

cable to keep it stable in order to protect the camera from 

the humidity problems.

TV MONITOR

DC12V POWER SUPPLY

VIDEO IN

Yellow (Video Out)

Black (GND Common)

Red ( DC +12V IN)

DIY CABLE CONNECTION

LEAD WIRE CONNECTION (STANDARD)

Mount Guide

Reviews: