eIVP-CFS-IV-V0004
56
4.5.1
HDD Security Configuration
Figure 4-5-1: HDD Security Settings
Set User Password
Set HDD user password.
*** Advisable to power cycle system after setting hard disk passwords ***
Discard or save changes option in setup does not have any impact on HDD when password is
set or removed. If the 'Set HDD User Password' option is gray, do power cycle to enable the
option again.
4.5.2
Security Boot
Figure 4-5-2: Security Boot Settings
Attempt Secure Boot
Secure Boot activated when Platform Key (PK) is enrolled, System mode is User/Deployed, and
CSM function is disabled.
Secure Boot Mode
Secure Boot mode selector Standard/Custom.
In custom mode Secure Boot Variables can be configured without authentication.
