Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP
37
5.5.5
IP Filter
You can configure the IP Filter settings on this page. This function allows you to allow or deny some specific IP
address to access the IP Camera. By default, all IP addresses are allowed to access the camera.
To set up IP filtering:
1.
From the
Filter Mode
drop-down list, select a filter mode. You can only activate one mode for the IP camera:
•
Allow all IP connections:
Select this mode to allow all IP addresses to access the IP camera. Click the
Apply
button to save the settings.
•
Allow the checked IP connections only:
Select this mode to allow only some specific IP addresses to
access the IP camera. Click the
Add
button to add the IP addresses and then check the
Enable
box. Click
the
Apply
button to save the settings.
•
Deny the checked IP connections only:
Select this mode to deny only some specific IP addresses to
access the IP camera. Click the
Add
button to add the IP addresses and then check the
Enable
box. Click
the
Apply
button to save the settings.
2.
If you want to delete the IP addresses from the list, click on the column of the IP address, the column will be
highlighted with a blue background, and then click the
Delete
button.
