7
1. Overview
This manual makes comprehensive introduction of uXcel charger series, presenting the
working principle, systematic structure, usage and maintenance of the chargers in detail.
Hope it would be convenient for the user.
The product applies to the charging of all kinds of lead-acid batteries, alkaline batteries and
the power supply of DC load. The charger has reasonable and compact configuration. Under
the digital IC, the operation of the charger is convenient and reliable with the charging mode
of constant voltage, constant current and cycling. When operating, the operation panel
works out the procedure in advance. After working out, it starts charging. The whole
charging process is auto-complete. The important component, transformer, adopts
high-durable enameled wire, which could reach H-level insulation grade. The power
component adopts aluminum profile and high-power SCR component of cake shape. The
product has superior performance and stable operation. In addition, it has long-distance
centralized controllable function, which could arrange real time monitoring management for
system by computer and mobile phone.
2.Technical Parameters
2.
1. Product model and implication
uXcel □V / □A
Rated current
Rated voltage
Product series
The rated DC Output current: 20A, 40A, 50A, 80A, 100A, 160A, 200A, 250A, 315A, 400A etc.
The rated Output voltage: 24V, 48V, 110V, 200V, 220V, 300V, 400V, 500V, 600V etc.
Note: the particular specification could customize.
2.2. Working condition
Input power: three phase AC400V
5
0Hz the allowable voltage fluctuation range of
power grid is
±
10%.
Equipment power:
1
6.
5
KW
The rated DC Output voltage:
330
V
The rated DC Output current:
5
0A
(Note: The rated DC Output voltage means the max charge voltage. If the input AC voltage of
the line is lower than the nominal voltage. The DC output current means the max charge
current.)
