Everdure UFEE61, Operating & Maintenance Instructions

Page: 9 / 20

DESIGNED TO PERFECTION
When you first run your oven a certain smell will be emanated arising from the insulation materials and the
heater elements. For this reason, before using your oven, run it empty at maximum temperature for 45
minutes. At the same time you need to properly ventilate the kitchen or environment in which the oven is
installed.
In order to cook in your oven, the oven function and temperature setting control knob needs to be adjusted.
The oven timer needs to be programmed either on “M” for manual, or a set period of time between 0-100
minutes, otherwise the bottom oven will not operate.
Turn your appliance off when it is not in use.
Protect your appliance from atmospheric effects. Do not leave it under the effects of the sun, rain, snow, dust
etc.
USING THE COOKTOP HOT PLATES
The cooktop part of the appliance is controlled via a knob on the control panel (with 7 heat levels).
Position “0” is the off position. The remaining 6 positions indicate the following types of use:
1
: Heat maintenance position.
2-3 : Heating in low temperature position.
4-5-6 : Cooking, frying and boiling position.
The knob rotation direction may differ according to the product specification.
Surfaces of hotplates are covered by a protective layer. At first use, operate the hotplates without a pan at
heat position 3 for 5 minutes in order to safely remove this layer and any residual smell.
Pans with flat base are highly recommended. Also, the size of the pans must be in line with the size
of cooktop hotplate elements for most efficient usage. Always centre the pans on the hotplate
elements. Using small sized pans on the large sized heating elements will cause heat loss and so
energy will be wasted.
WARNING: Using cookware that is too large can cause discolouration or damage to the cooktop surface
around the heat zones, which is NOT covered under warranty.
After using any hotplate element, please make sure that it is switched off.
Never touch any hotplate element, after it is turned off as it retains the heat for a certain period of
time.
Do not let children come too close while the cooktop is hot or in operation.
Clean the hotplates and enamel surface around the hotplates with a warm, damp, wet cloth after
use, but ensure the hotplates are off and not too hot. If there is excessive spillage, you can clean the
hotplates with a warm, damp, slightly soapy cloth (e.g. dishcloth).
If you do not intend to use the hotplates for a while, apply a thin layer of machine oil onto each
hotplate element for an extended life.
9