DESIGNED TO PERFECTION
CONTROL PANEL
THERMOSTAT TIMER FUNCTION
OVEN THERMOSTAT CONTROL
The oven thermostat control is used to select the desired temperature for cooking. When the temperature
inside your oven reaches the value set, the thermostat will cut the circuit and the oven elements will go off.
When the temperature falls below the set value, the thermostat will again be turned on alongside the oven
elements. It is normal for this to occur during the cooking process, particularly when the door has been
opened.
The oven thermostat knob can be set flush with the control panel when the oven is not in use by turning the
knob to “0” and gently pushing it in. Pushing it a second time will release it for use.
OVEN TIMER CONTROL
OVEN TIMER DISPLAY:
SETTING COOKING TIME
SETTING COOKING TIME LENGTH
SETTING
ALARM
SETTING END TIME BY CLOCK
CHILD LOCK SET
OVEN TIMER BUTTONS:
There are 5 timer control buttons located below the timer display:
“SET” button. This is used to “set” or start a timer function.
”DOWN” button. This is used to decrease a value on a timer function.
”OK” button. This is used to confirm a timer function has been set correctly.
”UP” button. This is used to increase a value on a timer function
”KEY” button. This is used to set the child lock or swap between minutes & hours.
NOTE: The timer will revert to the clock if while setting a function, more than 10 seconds elapses after the
last button is pressed (until the timer function is completed).
TIME DISPLAY
REMAINING
COOKING TIME (%)
9
