EASY DECISION
DIGITAL OVEN TIMER CONTROL (OBEGS602)
The maximum length of time the timer can be set for is 10 hours.
A – Time On/Off button
B – Increase button
C – Time button
D – Decrease button
E – Digital Display
F – Cooking Time icon
G – Cooking End Time icon
H – Timer Operation icon
I – Minute Minder icon
Setting the clock: When the power is first connected to the oven, the Digital Display (E) will flash (clock
needs setting). Use the Increase button (B) and Decrease button (D) to adjust the time and set by pressing
the On/Off button (A). To reset the clock at any time, press the Time button (C) for 3 seconds until the
Digital Display starts to flash and repeat from above.
The oven will cook normally while the Digital Timer is off. Cooking is only affected when a timer function
is set.
Minute Minder: The Minute Minder is a timed alarm that can be sent as a reminder, but does not affect
the cooking operation. To set the Minute Minder, press the Time button so that the Minute Minder icon
(I) flashes and adjust the time using the increase and decrease buttons. After a few seconds, the timer
icon will stay constant and the timer will begin to count down. When the set time is reached, an alarm will
sound (for up to 3 minutes), which can be disabled by pressing any timer button.
Set the cooking time: This timer function allows you to set the length of time the cooking runs for. Firstly,
pre-heat the oven and then place the food inside. Set the cooking function and temperature. Press the
Time button until the Cooking Time icon (F) starts to flash. Adjust the cooking time using the Increase and
Decrease buttons. After a few seconds, the Cooking Time icon will stop flashing, the Timer Operation
icon (H) will light up, and the timer function will start. When the set time is reached, the oven will turn off
(the Timer Operation icon will turn off) and the alarm will sound (for up to 3 minutes). Adjust the control
knobs to off/0 and disable the alarm by pressing any button.
Set the time for cooking to end: This timer function allows you to set a delayed start to the oven, which
finishes after a set cooking time. Firstly, set up the cooking time as per the last section (without pre-
heating the oven). With the Cooking Time icon still flashing, press the Time button once again so that the
Cooking End Time (G) starts to flash. The Digital display will show the current end time (current time +
cooking time). Use the Increase and Decrease buttons to adjust the cooking end time. After a few
seconds, the timer will be locked in and the current time will be displayed, as well as the Cooking Time
icon, Cooking End Time icon and the timer Operation icon. When the new start time (cooking end time –
cooking length) is reached, the oven will turn on. The oven will stay on until the Cooking End Time is
reached. At this point the oven will turn off, the icons will turn off and the alarm will sound. Adjust the
control knobs to off/0 and disable the alarm by pressing any button.
Note: it is not recommended to leave meat inside the oven for long periods of time before cooking as this
may cause spoilage.
ENERGY SAVING
Choose cookware of an appropriate size.
Using a lid will reduce cooking times.
Minimize the amount of liquid or fat to reduce cooking times.
Oven door should not be opened often during cooking period.
11
Summary of Contents for OBEGS601
Page 7: ......
