EVERDIGM EPG05, Operation & Maintenance Manual

Page: 18 / 38

- 18 -
5.4. Mounting the hydraulic grab

Step 1 :
Stopper
Arm
Link
Mounting Adapter
Grab
Mounting Pin
Figure 13

Before mounting the grab, please put it on the flat place to take care of the direction of the mounting
adapter as the drawing.

Set the carrier
‟s engine speed to low idle, and move the stick of carrier slowly until its hole is aligned with
that in the mounting adapter. Insert the mounting pin and assemble the stopper and its fasteners.
According to mounting adapter, the stopper and fasteners may not correspond exactly to Figure 13.