Eventide E-TEC 115 H.P., Operator'S Manual

Page: 81 / 96

77
YOUR EMISSION CONTROL WARRANTY RIGHTS AND OBLIGATION
The California Air Resources Board and Bombardier Recreational Products (“BRP”) are pleased to ex-
plain the emission control system warranty on your Evinrude E-TEC outboard. In California, new outboard
engines must be designed, built, and equipped to meet the State's stringent anti-smog standards. BRP
must warrant the emission control system on your outboard for the periods of time listed below provided
there has been no abuse, neglect, or improper maintenance of your outboard.
Your emission control system may include parts such as the carburetor or fuel injection system, the igni-
tion system, and catalytic converter. Also included may be hoses, belts, connectors, and other emission-
related assemblies.
Where a warrantable condition exists, BRP will repair your outboard at no cost to you including diagnosis,
parts, and labor provided that such work is performed by an authorized BRP dealer.
Manufacturer's Limited Warranty Coverage
This emission limited warranty covers Evinrude outboards certified and produced by BRP for sale in Cal-
ifornia, that are originally sold in California to a California resident, or subsequently warranty-registered to
a California resident. The BRP U.S. and Canada limited warranty conditions for Evinrude outboards are
still applicable to these models with the necessary modifications.
Select emission control parts of your Evinrude E-TEC outboard are warranted from the date of purchase
by the first retail consumer or the date the product is first put to use, whichever occurs first, for a period
of: 4 years, or for 250 hours of use, whichever occurs first.
However, warranty coverage based on the hourly period is only permitted for outboards equipped with the
appropriate hour meters or their equivalent. If any emission-related part on your engine is defective under
warranty, the part will be repaired or replaced by BRP.
Parts covered are:
The emission warranty covers damage to other engine components that is caused by the failure of a war-
ranted part.
The BRP Operator's Guide provided contains written instructions for the proper maintenance and use of
your outboard. All emission warranty parts are warranted by BRP for the entire warranty period of the out-
board, unless the part is scheduled for replacement as required maintenance in the Operator's Guide.
1. Electrical System 4. Air Induction System
A. EMM (Engine Management Module) A. Reed Valves
B. Spark Plugs and Wires B. Throttle Body Assembly
C. Ignition Coils C. Intake Manifold
D. Wiring Harness
5. Oil System
2. Exhaust System A. Oil Injector
A. Inner Exhaust Housing B. Oil Lines, Fittings, and Clamps
B. Adapter (Exhaust Manifold)
C. Megaphone (Inner Exhaust)
6. Sensors
A. Air Temperature Sensor
3. Fuel System B. Crank Position Sensor
A. Fuel Lift Pump C. Throttle Position Sensor
B. Fuel Supply Pump D. Water Temperature Sensor
C. Fuel Injectors E. Thermostat
D. Vapor Separator
E. Fuel Lines, Fittings, and Clamps
7. Gaskets
A. All Emission Component Gaskets
https://www.boat-manuals.com/evinrude/