29
For
ward-facing
Adjust the child restraint to the
upright position
(page 38) and place it in your vehicle
forward-facing
,
as shown. Route the Lower Anchor Connector Assembly
through each side of the forward-facing belt path
D
.
Note:
Lift seat pad away from seat for easier access.
Make sure Lower Anchor Connector Assembly strap lies
flat without twisting.
WARNING
DO NOT
use the three lower harness slots
forward-facing
.
The harness may not properly restrain the child in the event
of a crash.
2
D
1
Forward-facing Installation with
Lower Anchor Connectors
Make sure that the harness
straps are in one of the
three
upper
strap slots
A
. The
harness straps
MUST
start at
shoulder height or above, using
the strap slots closest to your
child’s shoulders
C
. The splitter
plate is attached to the bottom
of the harness strap in the
child
position
B
(page 37). This will
provide more room for your
child to fit comfortably.
B
A
C