23
Rear-facing
Make sure the harness
straps are in one of the
three lower
strap slots
D
.
The harness straps
MUST
start at shoulder height
or lower, using the strap
slots closest to your child’s
shoulders
E
, as shown.
3
DO NOT
use the two upper harness slots
rear-facing
. The
harness may not properly restrain the child during a crash.
WARNING
Lap Belt Only
Lap & Shoulder
Belt Combination
Pull the seat pad off of the front of the child restraint.
Route the vehicle seat belt
G
through the rear-facing
belt path
H
and continue through the opposite opening
of the child restraint.
IMPORTANT:
Make sure the seat
belt
G
is
in front of the crotch strap
I
, and it lies flat
without twisting, as shown.
Fasten the vehicle seat belt, as
shown, depending on your type of seat belt. Reconnect
the seat pad to the front of the child restraint.
U.S. Customers Only:
For a taller child, the fourth set
of harness slots
F
can be used.
Note:
These slots
MUST
start at shoulder height or lower and be the closest slots
to your child's shoulders.
Rear-facing Installation with Seat Belt
E
D
F
G
I
H
G
H
I
4
