Legal Information
•
Informations légales
•
Rechtliche Hinweise
This device complies with part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the interference by
one or more of the following measures: reorient or relocate the receiving antenna; increase the separation
between the equipment and receiver; consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
This equipment complies with FCC RF and IC RSS-102 radiation exposure limits set forth for an uncon-
trolled environment. This equipment should be installed and operated with a minimum distance of 0.5
centimeters between the radiator and your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be
installed to provide a separation distance of at least 0.5 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by Elgato Systems could void your authority to operate
this device. Purpose of control: operating control; construction of control: plug-in operating control; type 1
action, operating time: continuous.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement. Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Cet équipement est conforme aux CNR-102 d’Industrie Canada. Cet équipement doit être installé et utilisé
avec une distance minimale de 0.5 centimètres entre le radiateur et votre corps. Cet émetteur ne doit pas
être co-localisée ou opérant en conjonction avec autre antenne ou émetteur. Les antennes utilisées pour
cet émetteur doivent être installés et fournir une distance de séparation d’au moins 0.5 centimètre de toute
personne et doit pas être co-située ni fonctionner en conjonction avec une autre antenne ou émetteur.
For questions about Elgato product compliance with FCC regulations, please contact: Compliance Officer,
Elgato Systems, 900 Kearny St. #750, San Francisco, CA 94133.
Hereby, Elgato Systems declares that this device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EC. The declaration of conformity is available at
www.elgato.com/doc
Frequency range: 2402 - 2480 MHz, Max RF e.i.r.p power < 3dBm
Product: 10EAM9901 • Model: 20EAM9901 • Part: 51EAM9901 • FCC ID: SNE-ROOM-002
IC: 11192A-ROOM002
(8)
(9)
