26
Cautions
1. The induction hotplate must be installed by qualified personnel or
technicians.
We have professionals at your service. Please never conduct the operation
by yourself.
2. The cooker will not be installed directly above a dishwasher, fridge,
freezer, washing machine or clothes dryer, as the humidity may damage
the cooker electronics
3. The induction hotplate shall be installed such that better heat radiation can
be ensured to enhance its reliability.
4. The wall and induced heating zone above the table surface shall withstand
heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant
to heat.
Connecting the cooker to the mains power supply
This cooker must be connected to the mains power supply only by a suitably
qualified person.
Before connecting the cooker to the mains power supply, check that:
1. the domestic wiring system is suitable for the power drawn by the cooker.
2. the voltage corresponds to the value given in the rating plate
3. the power supply cable sections can withstand the load specified on the rating
plate. To connect the cooker to the mains power supply, do not use adapters,
reducers, or branching
devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so
that its temperature will not exceed
75˚
C at any point.
Check with an electrician whether the domestic wiring system is suitable without
alterations. alterations must only be made by a qualified electrician.
The power supply should be connected in compliance with the
relevant standard,or a single-pole circuit breaker.the method
of connection is shown below.
A
B
C
D
screw
bracket
Screw
hole
base
