EVBox BusinessLine, Installation And Commissioning Manual

Page: 19 / 46

4. Installation instructions
4.1. Prepare for installation
4.1.1. Tools and material required
1. Screwdriver, flat blade, 4 mm. 6. Wrench, 8 mm.
2. Screwdriver, flat blade, 8 mm. 7. Wire stripper (power cable).
3. Philips screwdriver, PH2. 8. Wire stripper (network cable).
4. Hex keys, 4 mm, 5 mm and 6 mm. 9. Silicone grease.
5.
Socket wrench with 4 mm, 5 mm and 6 mm
hex sockets, ¼ inch drive.
4.1.2. Plan for installation
The following recommendations are a guide to help you plan the installation of the charging station.
Choose location
• Position the charging station, where possible, in a location where it is not exposed to sunlight and
vulnerable to external damage.
• The minimum free space around the charging station is 300 mm.
• The location must allow the charging cable to remain within its bending tolerance.
4. Installation instructions
EN
15