User Manual - EVAstream with Piezo control V21.1
8
4
EVAstream operation: 3x piezo button | including workouts
Three piezo buttons (rotary address 931) in the pool provide the following options:
-
Switch EVAstream on, off
-
Choice of 3 users with auto-memory function for training and swimming speed (last used speed
is remembered for each user)
-
Choice of 3 pre-set workouts: Sprint, interval, or endurance workout
-
Set EVAstream for a fixed speed: speed +/-, standby
-
Underwater lighting: choice of light colour (various pre-programmed colours available), light
int/-, off
EVAstream Workout Mode
Button 1
Button 2
Button 3
EVAstream
STEP 1: Activate the System
Press button 2 = The 3 buttons flash, system is activated
STEP 2: Select the User
Press button 1 = USER 1
Press button 2 = USER 2
Press button 3 = USER 3
With speed auto-memory function per user
STEP 3: Select the Workout
The 3 buttons flash for 5 seconds: select a workout
during this interval.
If no selection is made, the EVAstream will automatically
switch to Fixed Speed Mode
Press button 1 = 15 minute sprint workout
Press button 2 = 20 minute interval workout
Press button 3 = 35 minute endurance workout
Optional in the Workout Mode
Press button 1 = SPEED DOWN
Press button 2 = PAUSE/STANDBY
Press button 3 = SPEED UP
Back to the start menu = Button 2 (STANDBY)
Button
1 (OFF)
Start (again) at STEP 1
If the EVA RGBW underwater lighting is connected to the Piezo circuit board (see the Piezo EVAstream Quick
Start Manual), the colour of the underwater lighting will be automatically synchronize with the swim
workouts. See page 9 for additional details.
