Power over Ethernet Repeater
UPE5600-RT User Manual
UPE5600-RT is an Ethernet and Power-over-Ethernet(POE) Repeater providing a 100/100Mbps Ethernet
transmission for 100m distance and extend Ethernet connectivity another 100m with power over Ethernet
capability. It forwards both Ethernet and PoE for another 330ft (100m) using an innovative power-processing
scheme and multiple units can be deployed in series for even longer distances, with no degradation in network
speed or latency. UPE5600-RT itself is powered by an Ethernet PoE switch (or PoE injector) and so requires
no separate power connection in the middle of the cable, making it extremely easy to connect and power IP
cameras two or three times further than previously possible without going to fiber or installing midspan power
sources.
In the simplest application, a UPE5600-RT allows an IP camera to be located 200-300 meters away from a
POE switch. The switch delivers POE power over the first 100 meters of Cat5 cable to the UPE5600-RT , and the
UPE5600-RT restores the Ethernet signal and forwards remaining POE power to the camera. The
UPE5600-RT requires no local power supply, and the UPE5600-RT presents no restriction to the camera
network connection.
Advantages:
•
Extends Ethernet cable installations for another 100 meters
•
Forwards Power Over Ethernet (POE) to remote devices
•
No power cable installation required
•
Ethernet 100Mbps Wire Speed
•
Fully Ethernet protocol transparent – no restrictions to network traffic
•
Compatible with IEEE 802.3af POE standard
•
Simple to install – Plug & Play
