Eusso 2 & 4 Port VoIP Gateway, User Manual

Page: 81 / 112

ITG User’s Guide
Database Update Control Commands
atpm done
The atpm done command ends the atpm table update session and re-enables the address
translation.
Syntax description
This command has no arguments or keywords
atpm erase
The atpm erase command erases the dial plan database from the non-volatile memory.
Syntax description
This command has no arguments or keywords
atpm purge {all|addr|dest|hunt}
Use the atpm purge command to delete all entries from the atpm tables.
Syntax description
all Delete all entries from atpm ddress, destination and hunt group tables.
addr
Delete all entries from atpm address table.
dest Delete all entries from atpm destination table.
hunt
Delete all entries from atpm hunt group table.
atpm req
The atpm req command starts the atpm table update session. Upon starting the atpm table
update session, the ATPM address translation is disabled, hence no phone call can be made,
until a
atpm done command is issued.
Syntax description
This command has no arguments or keywords
atpm restore
The atpm restore command restores the whole dial plan from non-volatile storage to the
atpm address, destination and hung group tables.
Syntax description
This command has no arguments or keywords
Command Line Interface
69