Eusso 2 & 4 Port VoIP Gateway, User Manual, Page: 72 / 112

ITG User’s Guide
net set ip_preced ip_preced
The ITG allows you to set the 3-bit IP precedence field in the IP header for all the voice
packets it sends out. Use the
net set ip_preced to set the IP precedence field.
Syntax description
ip_preced The IP precedence to be assigned to all the voice packets sent by the ITG.
The IP precedence must be in the range of 0 through 7.
Note
The new setting will not take effect until the ITG is reset.
net set mask ip_mask
Use the net set mask command to set the IP subnet mask for the ITG.
Syntax description
ip_mask The subnet mask of your network.
Note
The new setting will not take effect until the ITG is reset.
net set speed {10|100|auto}
The ITG allows you set the link speed for its Ethernet interface. Use the net set speed
command to set the Ethernet link speed.
Syntax description
10 Fixed the Ethernet speed at 10 Mbps
100
Fixed the Ethernet speed at 100 Mbps
auto Enable the 10/100 Mbps auto-negoriation capablity.
net set user_pw password password
Use the net set user_pw command to change the password for Telnet user.
Syntax description
password The new password. The password must be equal to or less than 7
alphanumeric characters. It must be identically typed twice for the ITG to be
certain about the new password.
Command Line Interface
60