Eusso 2 & 4 Port VoIP Gateway, User Manual

Page: 71 / 112

ITG User’s Guide
8.8 Network Commands
net reset
Use the net reset command to reset the ITG. The CLI will prompt you to confirm the
command before resetting the ITG.
Syntax Description
This command has no arguments or keywords
net set gateway ip_addr
Use the net set gateway command to assign a default gateway (router) for the ITG. The
default gateway routes packet data outside or your IP subnet.
Syntax description
ip_addr The IP address of the default gateway. IP address of 0.0.0.0 stands for no
default gateway.
Note
The new setting will not take effect until the ITG is reset.
net set http {on|off}
The ITG allows you enable of disable its built-in HTTP server. Use the net set http
command to enable or disable the HTTP server.
Syntax description
on
Enable HTTP server. This allows users to access the ITG from web
browser.
off
Disable HTTP server.
net set ip ip_addr
Use the net set ip command to assign an static IP address to the ITG.
Syntax description
ip_addr The IP address of the ITG.
Note
The new IP address will not take effect until the ITG is reset.
Command Line Interface
59