Eusso 2 & 4 Port VoIP Gateway, User Manual

Page: 103 / 112

ITG User’s Guide
Appendix B CLI Commands
B.1 Normal Mode Commands
Command Description Page
atpm aadd Add an entry to the address table 75
atpm adel Delete an entry from the address table 75
atpm afind Find and display an entry in the address table 75
atpm alist Display all entries in the address table 76
atpm dadd Add an entry to the destination table 71
atpm ddel Delete an entry from the destination table 71
atpm dfind Find and display an entry in the destination table 72
atpm dlist Display all entries in the address table 72
atpm hadd Add an entry to the hunt group table 73
atpm hdel Delete an entry from the hunt group table 73
atpm hfind Find and display an entry in the hunt group table 73
atpm hlist Display all entries in the hunt group table 73
atpm done End the atpm table update session 69
atpm erase Erase all atpm tables from NVS 69
atpm purge Purge entries from atpm table(s) 69
atpm req Start atpm table update session 69
atpm restore Restore atpm tables from NVS 69
atpm store Store atpm tables into NVS 70
atpm slist Display atpm system parameters 77
atpm sys Set atpm system parameters 77
config activate Move the configuration from temporary area to active
area. 62
config erase Erase the configuration from NVS 62
config store Store the active configuration data into NVS 62
clrscr Clear screen 57
download Switch to download mode 58
help Display help screen 58
CLI Commands 91