manualshive.com logo in svg

Eurotron UniCal mA, Instruction Manual, Page: 32 / 34

Share
Download
Eurotron UniCal mA Instruction Manual Download Page 32

_______________________________________

______________________________________

Instruction Manual MM850099 ed.02a

_________________________________________ 32 ________________________________________

10

CERTIFICATES

10.1

Certificate of warranty

Each instrument is shipped with a certificate of warranty that indicates the validity conditions of the
warranty itself.

EUROTRON

 warrants its products against defects in materials and workmanship for a period of 2 years

from the date of original retail purchase.
Any misuse, abuse, or non 

EUROTRON

 authorized alterations, modifications and/or repairs to the

EUROTRON

 product will void the warranty. If you discover a defect, 

EUROTRON

 will repair or replace

the product, provided you return the product during the warranty period, transportation prepaid, to

EUROTRON

 .

This warranty applies to the original purchaser only.
Please include a copy of the original invoice or a small service charge may be applied.
Prior to returning the product for warranty consideration, call 

EUROTRON

 Technical Support for a return

material authorization number and shipping instructions.

10.2

Certificate of Conformity

Each instrument is shipped with a numbered Letter of Conformity, to grant  that the characteristics of the
instrument correspond to the required ones, and that the instrument calibration is traceable to the
National and International Standards.

Summary of Contents for UniCal mA



































Reviews:

No comments