manualshive.com logo in svg

Eurotron UniCal mA, Instruction Manual, Page: 16 / 34

Share
Download
Eurotron UniCal mA Instruction Manual Download Page 16

_______________________________________

______________________________________

Instruction Manual MM850099 ed.02a

_________________________________________ 16 ________________________________________

5

UNPACKING

Remove the instrument from its packing case and remove any shipping ties, clamps, or packing
materials.
Carefully follow any instructions given on any attached tags.
Inspect the instrument for scratches, dents, damage to case corner etc. which may have occurred during
shipment.
If any mechanical damage is noted, report the damage to the shipping carrier and then notify

EUROTRON

 directly or its nearest agent, and retain the damaged packaging for inspection.

A label, inside the battery  container, indicates the serial number of the instrument.
Refer to this number for any enquiry for service, spare parts supply or application and technical support
requirements.

EUROTRON

 will keep a data base with all information regarding your instrument.

Summary of Contents for UniCal mA



































Reviews:

No comments