Eurotherm TC3001, User Manual

Page: 27 / 79

Transit Inspector Pro 27
Administrating Module
User Guide
(continued from previous page)
Property Description
Analyse video from camera
Select a camera that will be monitoring trains.
Attention!
For the corresponding Camera object set the following
parameters:
•
Pre-recording phase duration
— set an approximate train
transit time by the camera view (in seconds).
•
Resolution — set the
High (CIF2)
value.
Synchronously record
video from cameras
Enable the Camera objects that corresponds to additional system
cameras. This video will be recorded with source camera video
stream that set in the Analyse video from camera parameter (see
above).
Video recording mode
select from the list the required cameras working mode (for all
cameras enabled above). Possible values:
Record entire train
— record video frame with entire train pass-
ing
Record frames with numbers
— record frames with captured
(recognized) carriage numbers, the frames of the best quality
Recognize numbers of wagons coming from
From left to right
,
From right to left
Choose the check box(es) that correspond(s) to the possible train
direction in frame (relative to recognizer camera).
Directions names (relative to camera’s poin of view)
From right to left ,
From left to right
Define directions names.
Redirect results to
Set the recognition results destination. Possible values:
database
— select the button to save the results to database and
define the corresponding Database object (see 4.2.2 Database
on page 24 ). The parameter is inactive for the Transit:
assisting recognizer
consolidator — select the button if the recognizer is a source
for a consolidation module (see 4.2.5 Transit: consolidation
module on page 37 ).
Write debug information
Select this check box to create a log file of the Module events.
www.isscctv.com