Eurotherm 637+/D6R KD6R, Product Manual, Page: 58 / 87

58
Product-manual Model: 637+/D6R KD6R 07-02-09-01-E-V0402.doc
7 Setting and programming
7.1 Jumper
All jumpers are set to a standard position in production !
JP100,
bridged pad...
2 and 3
(standard) READY contact with reference to
common output supply voltage on
X10.21
1 and 3 READY contact can be wired freely
JP101,
bridged pad...
2 and 3
(standard) Analog input X10.19 without internal
Pull-up.
1 and 3 Analog input X10.19 with internal
Pull-up to +12 V
(FRR compatible)
JP102,
bridged pad...
2 and 3
(standard) X10.23 = active ok. output
1 and 3 X10.23 = GND internal
(FRR compatible)
JP1, JP2
bridged pad... adjust identically !
2 and 3
(standard) X10.15 = high-active
1 and 3 X10.15 = low-active
JP3, JP4
bridged pad... adjust identically !
2 and 3
(standard) X10.14 = high-active
1 and 3 X10.14 = low-active
JP2.8, JP2.3
JP2.7, JP2.2
open Default, RP CAN,RP DEV, RP
PDP
close RP 232, RP 422, RP 485,
RP IBS,RP EA5, RP SUC
7.2 Digital communication
see chapter 1.1.1