manualshive.com logo in svg

Eurotherm 5100V, User Manual

Share
Download
Eurotherm 5100V User Manual Download Page 96

100/180 MM GRAPHICS RECORDER: USER GUIDE

HA261742

Issue 16  Nov 04

User Guide
Page 92

4.4.1  ACCESS LEVELS (Cont.)

EDIT MATHS CONSTANT

For recorders fitted with the Maths option only. If one or more maths channels are configured with function 'Con-
stant', then with this permission set, the user may edit the constant value(s).

RESET MATHS

Allows the user to reset applicable maths function either directly from the maths channel configuration page or by
setting a maths job.

PRESET TOTALISERS

Allows the user to preset totaliser values (if the option is fitted) either directly from the configuration page or by set-
ting a totaliser job.  See section 4 of the Options Manual for further details of totalisers.

PRESET COUNTERS

Allows the user to preset counter values (if the option is fitted) either directly, from the configuration page, or by set-
ting a counter job.  See section 5 of the Options Manual for further details of Counters.

START/RESET TIMERS

Allows the user to start and reset the timer value (if the option is fitted) either directly from the configuration page or
by setting a timer job.  See section 6 of the Options Manual for further details of timers.

SET CLOCK

Allows each user with this permission enabled, to set the recorder time and date functions under System/Clock

ADJUST INPUTS

 Allows the user to adjust recorder readings as described in 

section 4.6.4

, below

ARCHIVING CONTROL

Allows each user with this permission enabled full access to disk archive control.

SAVE/RESTORE

Allows each user with this permission enabled, full access to saving and restoring functions as described in 

section

4.2

, above.  Without this permission, the SAVE/RESTORE key does not appear.

PASTE/DELETE FILES

Allows each user with this permission enabled, to Paste and Delete files as described in section 5 of this manual.

FULL CONFIGURATION

Allows each user with this permission enabled, full access the recorder configuration.

FULL SECURITY

Allows each user with this permission enabled, full access to all recorder security functions.

BATCH CONTROL

This field appears only if the Batch Option is fitted - Refer to section 1 of the Options Manual for further details.

CAN SIGN

This appears only if the Auditor Pack option is fitted.  If the field is enabled it allows the user to change the configura-
tion of the recorder (according to the other permissions set for the login), providing the security management system
'Require Authorization' is not enabled.  If it is, changes can be made only if the correct password for a user with 'Can
Authorize' permission is entered.  See 

section 4.4.2

 for details

Summary of Contents for 5100V





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands