100/180 MM GRAPHICS RECORDER: USER GUIDE
User Guide
Page 131
HA261742
Issue 16 Nov 04
B4 OPTION ENABLING
In order to enable software functions, a key code or filename, obtained from the manufacturer, must be entered in the
System/Key code page (Figure B4).
Note: The key code is related to the instrument number, as displayed on the key code page. Please ensure that
this instrument number has been noted before applying for a code or filename.
Figure B4 Option enable (key code) page
B4.1 Instrument Number
This number, unique to each recorder, is used to identify the unit should any need arise for the user to contact the
manufacturer or distributor of the instrument (if, for example, the user needs to enable one or more software options.)
B4.2 Key Code
Touching this field causes a qwerty style keyboard to appear, allowing the user to enter the key code received from the
manufacturer or distributor. This is an alternative to loading the Key Code File described below.
B4.3 KeyCode File
The key code may be sent to the user by, for example, e-mail. By saving the code to a floppy disk, the key code can
be transferred to the recorder, and the file read from the floppy disk. Alternatively, the code can be entered manually
as described above.
Instrument Number
Key Code
6
> 6 e y 4 W 4 1
Apply
Discard
Key Code File
See section 4.6 for remain-
ing System configuration
Archive
System
Save/Restore
Config
Security Network
Clock
Locale
Key Code
Input Adjust
About
Comms Diagnostics
Copy
