100/180 MM GRAPHICS RECORDER: USER GUIDE
User Guide
Page 113
HA261742
Issue 16 Nov 04
4.7.8 Timer jobs
If the Timer option is fitted (section 6 of the Options Manual), the following jobs become available:
1.
Reset timer - sets the timer to zero
2.
Start timer - causes the timer to start.
3.
Disable timer - stops the timer.
Figure 4.7.8 Timer job menu layout
4.7.9 Batch Jobs
If the Batch option (section 1 of the Options Manual) is fitted, a previously 'Stored' batch can be started by job action
or by a Batch Start command sent via MODBUS/TCP (section 2.4.4 of the Communications Manual). If a batch is
already running, it will be restarted. In Batch configuration, if Scope = Group, then a specific group can be selected
for the batch job to act on; if Scope = Instrument, the Group selection field does not appear.
Job Number
Action
Category
Timer
On
Timer 1
1
Timer
Reset
Active
Select 'Reset', 'Start' or 'Disable'
Select Required Timer
Select 'Active', 'Inactive' or 'Acknowledgement'
Job Number
Action
Category
Group
On
1) Group 1
1
Batch
Start
Active
Select 'Start' or 'Stop'
Select Required Group
(only if Scope = Group in Batch Configuration)
Select 'Active', 'Inactive'
or 'Acknowledgement'
Figure 4.7.9 Batch job menu layout
